Corners

Corner Blocks Assembly

New Corners 4/24/16

IMG_20160424_160449IMG_20160424_160558

These three corner parts are marked with either a letter ( C, F, J). Make sure you are a using either all the normal ones or mirrored together, 2 sets of each.

 

IMG_20160424_160712IMG_20160424_160809IMG_20160424_160857

Use 3/4″ or equivalent screw and nut, Bottom, and Lock pieces. You can use glue here for added strength.

 

IMG_20160424_161106IMG_20160424_161211

Insert the leg all the way until seated, carefully snug the screw. It does not take much to keep the leg from falling out.

 

IMG_20160424_161402IMG_20160424_161300IMG_20160424_161643

Add the Top and Spacer. Again it takes very little force to snug this up. Try and get all four gaps roughly equal. If you hear cracking you are using 3x’s too much force (you know who you are)!

That’s it, easy.

 

Old Corners

IMG_20150726_183316

3/4″ screws and Lock nuts.

IMG_20150726_183517

 

Wedge the lock nuts into the side of the block and start the screws, tighten in final assembly.

IMG_20150726_183607Same for the front, 3/4″ screws.

IMG_20150726_183729Full corner block

cornerBear Tech & Tools breaks it down