Home / Forum / Troubleshooting / MPCNC has the Jitters / Reply To: MPCNC has the Jitters

Profile photo of RAGIIRAGII
Post count: 39
#12192 |

It behaved the same when I ran it out of Repetier Host. I did it from the LCD for the video as it was easier to get long runs without traveling too far.

I will tighten up the belts a little bit. I know I read where the belts are supposed to be loose so I did not want to over tighten them. The conduit is a little rough. I have some fine sandpaper / emery cloth so I will give that a try as well.

Thanks for the pointers.