Home / Forum / Assembly / Australian tube options / Reply To: Australian tube options

Profile photo of Asho777Asho777
Post count: 59
#13109 |

Hi tortfeaser, I see a Sydney phone number, which part of Sydney are you in.

I went with the Stainless Steel 25mm OD tube, and found it to be very accurate along it’s length. The wall was 1.3mm and over the length of 875mm, I have no deflections.

The stainless is very expensive though, and I think If I built another MPCNC I would go the Aluminium Tube with 3mm wall.