Home / Forum / Assembly / 1 inch stainless / Reply To: 1 inch stainless

Profile photo of Mike CunninghamMike Cunningham
Post count: 12
#13930 |

If you can create a version with no bolt holes for the bearing bolts, except the important ones (like the one that the 5″ bolt goes through in the XY); I could create a relatively simple parametric openscad script to space the remaining holes for any size pipe (within reason)

the holes won’t be all neat and rounded, and the flare will be squared; but if you print at 100mm/s, all of the corners get rounded anyhow 😉