Reply To: Estlcam varying cut depth on same tool path

New Home Forum Software Development Estlcam varying cut depth on same tool path Reply To: Estlcam varying cut depth on same tool path

#14949
Profile photo of Ryan
Ryan
Keymaster

I don’t think there is an easy way except to make 2 cuts, like the estlcam walk through I just put up yesterday. Start the first cut from zero (the top of your material) but set the depth of cut very shallow, then on your second cut start it at the previous cut height and go down from there.

I can’t think of any way to do it from and stl (3D cut) other than taking shallow passes.