Home / Forum / Assembly / upgrading to 525 / Reply To: upgrading to 525

Profile photo of vicious1vicious1
Post count: 2649
#15022 |

To upgrade you will need a 5″ bolt and 4×2.5″ bolts That should be it.

RollerM is mirrored to get rid of printing inconsistencies that were causing some people issues and making there gantry’s crooked. You will see the gantry cradle cut is opposite (and the letter is backwards).

The roller plate take the place of the skate washers, fender washers, and gives a good place to cable tie wires to.