Home / Forum / Troubleshooting / machine gone rogue! (motors at least) / Reply To: machine gone rogue! (motors at least)

Profile photo of vicious1vicious1
Post count: 2660
#15286 |

Well I know it would suck but you can either switch axis drivers to see if the problem stays with the axis or with the driver. Then Either replace the driver or the wires. Quickest way to test, plus you don’t want to screw up any more jobs. Bummer, I had this happen with a printer of mine. one of the wires broke inside of the insulation and caused random issues. I found it but clamping on a continuity tester and wiggling each wire till I found the little booger. Then ended up relacing them all anyway…