Home / Forum / Troubleshooting / Trouble when cutting ! / Reply To: Trouble when cutting !

Profile photo of BarryBarry
Post count: 328
#15342 |

Holy crap! Here’s your problem.

;No. 1: Contour interieur 4
G00 X46.5739 Y119.4152
G00 Z0.5000
G01 Z-1.0000 F2502 S24000

Your feed rate is way too high. I’ve been engraving at 90 to 100 mm/s, you’re trying to cut at 2,502mm/s.