Home / Forum / Random or Off Topic / 2.8W Laser Cutting Limitations / Reply To: 2.8W Laser Cutting Limitations

Profile photo of ualdayanualdayan
Post count: 61
#16049 |

In my experience with my 2.8W laser it can cut birch plywood – but it can be limited by your patience in doing so. The more complicated, longer path it’s cutting, the longer it’s going to take and with birch plywood it seemed to take quite a few passes. (it burns through the top layer of wood quickly, hits the glue/middle ply and gets stopped even with adjusting downwards a little after every pass, then it finally burns through there and hits the glue/3rd layer in the same way) Solid wood seemed to cut much easier than plywood.