Reply To: I'm New! – Z axis and extruder working but x/y won't move

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC I'm New! – Z axis and extruder working but x/y won't move Reply To: I'm New! – Z axis and extruder working but x/y won't move

#16409
Profile photo of vicious1
vicious1
Keymaster

Too fast. Absolute max is 197mm/s, try 100 or less to be safe.

You are looking for pins in the hole without solder on them. They usually get soldered on one side, not the other. Easy fix if you can solder a little bit.