Home / Forum / Troubleshooting / Help setting up the drivers/motors / Reply To: Help setting up the drivers/motors

Profile photo of ramajacramajac
Post count: 11
#16912 |

Finally I solved it. Tried with a different driver, and it was the problem. Chinese drivers can give you a big headache sometimes :S

Wired the motors, finished assembling all the machine, trimed them with enough voltage, and everything seemed to work smoothly, when I made a short circuit on my board with a wire that I was moving above it 🙁 Another arduino and ramps are on the way, and now im printing the case to prevent this from happening again XD

Thank for the help, next problems will come when calibrating the machine 🙂