Home / Forum / Getting Started / Y Home position less then 0 / Reply To: Y Home position less then 0

Profile photo of JasonJason
Post count: 334
#18395 |

Essentially I want to use the corner of my spoilboard as 0x0. One axis is lined up correctly the other is not (mistake when I bolted down my spoilboard)So from 0,0 the spoilboard is 17mm so I wanted to offset my home by 17mm like my 3d printer is. the home on my x axis on my 3d printer is -38mm.

crap I just looked at how my print is setup.. X min is -38 and home is 0. ugh… i thought i looked at it properly. I will try Home 0 and min as -17