Reply To: Different problems on the three axes (including the Z buzz / dive)

New Home Forum Troubleshooting Different problems on the three axes (including the Z buzz / dive) Reply To: Different problems on the three axes (including the Z buzz / dive)

#18624
Profile photo of John
John
Participant

Centered in the z nut assembly thing? As far as I can tell yes. I only put one screw in it so it could pivot if it wasn’t perfectly straight. During z travel it doesn’t visibly move around.

My test cuts today seemed to work out ok but they weren’t very involved. I’d still like some clarification on how to adjust the voltage for the z stepper.