New Home › Forum › Troubleshooting › Perfect built at last (after a lot of tuning) – oval circles and rectangulars › Reply To: Perfect built at last (after a lot of tuning) – oval circles and rectangulars
I mostly use GRBL for stuff like this now, so my Marlin experience isn’t really growing anymore, but if you can find some gcode where commands are being ignored due to the feed rate I’d be interested in seeing it so I can avoid doing it in the future. Everything else I’ve tried on both firmwares generated from InkScape seems to perform the same way once the speed is fixed to counteract the LCD CPU drain. I.E. A simple find/replace-all on the two F values.