Reply To: Greyscale image burning in to wood

New Home Forum Builds and Things Built Greyscale image burning in to wood Reply To: Greyscale image burning in to wood

#21532
Profile photo of vicious1
vicious1
Keymaster

The ringing could be a lot of things. I think most common is from your accelerations being high, or your machine being very tall. How far down is your laser hanging? As always you should raise your material up to the gantry as far ass possible to minimize this.

Could be loose belts but usually not. A cool trick is to zip tie your zip tie….it takes the spring out. Shown in the pic.