Reply To: Prints Coming out all…Strange

New Home Forum Troubleshooting Prints Coming out all…Strange Reply To: Prints Coming out all…Strange

#21598
Profile photo of vicious1
vicious1
Keymaster

So if you didn’t change anything else. You used the same settings and printed the vase, the only thing it doesn’t do is retract. That is a good setting to look into. I retract 1mm on the mk8 and only after more than 3mm of movement. retract speed is at 35mm/s.

If that isn’t it it just probably comes down to how you are slicing it. parimeters, speeds, infil, overlap, ect. maybe travel speed try 60mm/s

The vase looks pretty good so you know it isn’t the machine, extruder, or filament.