Home / Forum / Hardware / Auto Z leveler? / Reply To: Auto Z leveler?

Profile photo of shannonb1shannonb1
Post count: 3
#3125 |

Im using a piece of MDF so that it was to close to flat as I was going to get but I also plan to use insulation foam as a buffer between my cut material and the mdf. Ill me mainly cutting out foam airplanes and balsa wood and dont want to scar my main table. My thought being as a throw a piece of foam on the board I would level to the foam so having the board milled doesn’t really solve the issue not saying that a pass around it would be a bad thing.