Reply To: Temperature value odd in Repetier with 100 Ohm resistor

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Temperature value odd in Repetier with 100 Ohm resistor Reply To: Temperature value odd in Repetier with 100 Ohm resistor

#4154
Profile photo of vicious1
vicious1
Keymaster

Found the problem, one of the bags of resistors is 100 ohms, needs to be 100k ohms.
Sorry the other firmware should work. I’ll update it soon and put it on the homepage shortly.