Home / Forum / Software / Laser Toolpaths / Reply To: Laser Toolpaths

Profile photo of karltinslykarltinsly
Post count: 279
#5859 |

Wow, this thing came out great! This was my first burn on anything other than MDF. These are pine plaques I got from Amazon, but are available at any craft store.

Pine burns much more easily than the MDF. These burns are easily 1/16 deep. I’m very happy with how this turned out. Tomorrow I’ll see what I can do to remove the charring around the edges.

SCLA Award first burn on pine.

Gcode created with LaserEtch, burned at 1.8a, 800 mm/min.