Home / Forum / Troubleshooting / Steppers shakin and speed settings / Reply To: Steppers shakin and speed settings

Profile photo of TimTim
Post count: 2
#6544 |

I have only one stepper mounted. But now i have to deal with the temp error. (477°C. T0 with 100k installed. Or should T0 have only 100? Brown-Black-Yellow-Gold = 100 k. Brown-Black-Brown-Gold = 100) If it should be 100 instead of 100k i got the wrong resistor installed.)

Never the less my single test stepper does not work. (i turned on the easy mode, Repetier then ignores temp errors and extrude commands). Can it be possible, the voltage is false or the stepper is not possible to work 1/32 microstepping?