Home / Forum / Getting Started / Help with improved Z axis printing / Reply To: Help with improved Z axis printing

Profile photo of CaseyCasey
Post count: 27
#6725 |

Sooo, I am on day 4 of trying to get this stupid part to print and on the verge of loosing my mind (slight exaggeration). I have fixed the support issues I was having, but have now introduced a new issue that keeps me from completing my print. Somewhere between 9.35mm and 9.75mm when the print is generating the support for the through holes at the front of the object, the nozzle is digging in to the print and shifting my Y axis between 1-4mm. If I allow it to continue it then shifts back right at the top of the through holes right around 17mm. My belts aren’t slipping, there is something in the gcode that is causing the nozzle to interfere with the existing print. I am attaching my gcode in hopes that someone smarter than I can spot the problem. Please help. 🙂