Getting closer. The legs are on, I screwed and hot glued them. I had a lot of sanding and filing to get the conduits into the printed leg parts. I’m noticing a big difference in filaments. Some filaments take less post printing work than others.
The frame is squared up, and I’m printing my tool holder. I have a small tool holder on now for testing. Next I will work on the wiring. I’m not going to use the solder-less connections. I made up some connectors and will post more on this later. I’m also going to ground all the metal parts. The air is dry here in the winter and electrostatic shocks are common. Electronics hate to be zapped with a few thousand volts.