Home / Forum / Software / Travel_Speed Setting in MARLIN / Reply To: Travel_Speed Setting in MARLIN

Profile photo of Franz MaierFranz Maier
Post count: 23
#7875 |

Z-feedrate and a hint to the IE-Builders:

To get a maximum of 40000 steps per second with a DEFAULT_AXIS_STEPS_PER_UNIT of 5120 for the 8mm threaded rod, I think Z-feedrate has to be limited to 7.8mm/s instead of 8.7mm/s for the 5/16 threaded rod. (40000/5120=7.8125)