Home / Forum / Troubleshooting / Shaking when above 200mm/m feedrate / Reply To: Shaking when above 200mm/m feedrate

Profile photo of RyanRyan
Post count: 125
#9031 |

Yeah, so no change… in fact i just tested laseretch (jtech software) and im running engravings at 2000mm/m there with no issues, which is fine if i could get the working in piclaser as well. Im just realizing that the speed is hitting those limits you mentioned and no change in the software will change that. its something inherent to it.
but others have used piclaser, so i guess ill have to figure it out. or chuck it.