Reply To: My first CNC Build – MPCNC

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC My first CNC Build – MPCNC Reply To: My first CNC Build – MPCNC

#9484
Profile photo of Ryan
Ryan
Keymaster

Both.

You will want to raise up the thin sheets anyway, so do the T track or holes and clamps and a vac box. When you use the vac box you can clamp it in place. then when you don’t need the vacuum you won’t be messing up that million hole surface. Even though drilling a ton of holes is super easy with a cnc mil…