3 questions regarding parts (build)

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC 3 questions regarding parts (build)

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Richard Rouse Richard Rouse 8 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #12616
    Profile photo of leslie
    leslie
    Participant

    Does anyone know if this
    5/16-in x 1-1/2-in Stainless Steel Standard (SAE) Fender Washer will work for the 5/16 Fender Washers?

    Does anyone know where to get a 5/16 x 7/8 coupling nut?

    Are all the screws/bolts hex, philips, hex socket, slotted? (based on the build there seems to be a mixture of hex and philips, can anyone confirm this type or does it not matter?

    Attachments:
    #12624
    Profile photo of vicious1
    vicious1
    Keymaster

    Fender washer will work.

    The coupler you should just go have a look at your local hardware store there are short and long ones, we use the short (long will work but not in the new upcoming parts).

    Screw type does not matter.

    #12698
    Profile photo of Richard Rouse
    Richard Rouse
    Participant

    Better to buy from vicious, but, you’ll have an easier time finding it at ace than the big box home stores…

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.