Alternative Paste Extruder

This topic contains 1 reply, has 1 voice, and was last updated by Profile photo of pls pls pls pls 7 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13155
    Profile photo of pls pls
    pls pls
    Participant

    Hey guys,
    I just saw Alted’s post on the past extruder by fabriquers.com, and I thought I would just throw what I had don into the ring.I started this about 2 weeks ago, and I have tested it, but no real prints yet. What I did was modify richrap’s v2 paste extruder with an additional part to attach to the bottom of the z axis. it’s a pretty simple setup, but it works. I will repeat that this is not my design at all, all I did was make an attachment for the paste extruder. If anybody else wants to try it, it attaches to the conduit in the same manner as the motor mount of the z-axis. I will be adding a download link if someone wants one, but I need to wait to upload it onto thingiverse.

    #13156
    Profile photo of pls pls
    pls pls
    Participant

    Sorry, I tried to upload the file but apparently I can’t, here is a working download link

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.