another flashing problem

This topic contains 8 replies, has 3 voices, and was last updated by Profile photo of Ulrik Lohse Ulrik Lohse 5 months ago.

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #16274
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    i get this when i try to compile and flash my ramps

    Arduino: 1.0.6 (Windows NT (unknown)), Board: “Arduino Mega 2560 or Mega ADK”
    In file included from /SdFile.h:27,
    from /cardreader.h:8,
    from cardreader.cpp:2:
    SdBaseFile.h:38: error: ‘xxstruct’ does not name a type
    SdBaseFile.h:199: error: ‘fpos_t’ has not been declared
    SdBaseFile.h:203: error: ‘fpos_t’ has not been declared

    I am not great at arduino , so i need a little help

    and yes , i have downloaded 1,0,6 marlin , that helped a lot on the other faults in the firmware , but i cant get these 2-3 fault to go away

    regards Ulrik

    #16296
    Profile photo of vicious1
    vicious1
    Keymaster

    Use an older version of the arduino sotware 1.6.5 or older. They just did a screwy update.

    #16297
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    I am using the 1,0,6 version of arduino , that help with a lot of the faults , but not with those 3 in my first post

    #16300
    Profile photo of John
    John
    Participant

    Try arduino 1.6.5. 1.0.6 is too old I think.

    #16307
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    thx , i will try that

    i will update the progress

    #16313
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    nope didnt help

    Arduino: 1.6.5 (Windows 8.1), Board: “Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)”

    In file included from SdFile.h:27:0,
    from cardreader.h:8,
    from cardreader.cpp:2:
    SdBaseFile.h:38: error: ‘xxstruct’ does not name a type
    xxstruct fpos_t {
    ^
    SdBaseFile.h:199: error: ‘fpos_t’ has not been declared
    void getpos(fpos_t* pos);
    ^
    SdBaseFile.h:203: error: ‘fpos_t’ has not been declared
    void setpos(fpos_t* pos);
    ^
    ‘xxstruct’ does not name a type

    #16314
    Profile photo of vicious1
    vicious1
    Keymaster

    Download a fresh copy of the firmware just in case something happened and you didn’t notice.

    #16317
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    It works now or rather the Z axis work , i cant get the others to move atm , need to look into that tomorrow

    #16318
    Profile photo of Ulrik Lohse
    Ulrik Lohse
    Participant

    thx for the help guys

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.