Home / Forum / Hardware / Clamping/fixturing

Viewing 3 posts - 1 through 3 (of 3 total)
  • Profile photo of nerdyrcdrivernerdyrcdriver
    Post count: 187
    #13537 |

    I swear I saw a thread like this somewhere but I can’t seem to find it using search or manually combing through the forum.

    How are you guys clamping work pieces down? Right now I have an MDF board screwed to the 2×4 base that I made for my machine. I just screw through the work piece and into the mdf. It isn’t a perfect solution, but it is easy and works. I am debating 3d printing or buying some t track and recessing it in the board.

    Profile photo of vicious1vicious1
    Post count: 2639
    #13538 |

    That’s how I do it just remember to give it a quick sanding when you unscrew things to get rid of the humps the screws make. Sometimes I use clamps through holes in the waste board but not very often.

    Profile photo of JohnJohn
    Post count: 128
    #13542 |

    This is what I put together… Mdf, and I used a keyhole router bit to make the channel and then printed some arbitrary clamps from thing inverse…

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.