Home / Forum / Hardware / CNC MOSTLY ROUTER SUPPORT

Viewing 2 posts - 1 through 2 (of 2 total)
  • Profile photo of RISSOUALRISSOUAL
    Post count: 2
    #10728 |

    cnc mostly
    I want support 3d for router Bosch 1210:

    Profile photo of tmelvintmelvin
    Post count: 31
    #10762 |

    Being that most people probably don’t have that router, I would recommend measuring it around the bottom and middle. Then try and find some mounts for another router that will fit. Another option is to learn a 3D design program there not that hard once you start. Just dive all in one weekend when you have some time

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.