Home / Forum / Random or Off Topic / Dust Collector


Viewing 4 posts - 1 through 4 (of 4 total)
  • Profile photo of TeutTeut
    Post count: 5
    #14820 |

    I thought I’d share this for those of you in the same boat I’m in…

    All my woodworking equipment is in the garage, not by choice… But by the direction of the voice of she who can’t be denied (aka she who says yea or nay when I want new toys like a mpcnc). Dust it seems is an evil demon creature that must be prevented at all costs.

    Current Home Improvemnt Project: Kitchen mods… Move walls, new walls fill in and make new doorways, load bearing etc… New lighting modify kitchen cabnets… Move plumbing… All for a walk in 6×4 pantry.

    Present day… Drywall mudding.. Sanding… DUST EVERYWHERE!

    Lightbulb! brilliant idea! Major Brownie Points with the toy approver!

    Me:… Explain brilliant idea…
    14 Year old daughter… You mean like the miners did back in the 1800s? You know .. What they told us when we toured that mine a week ago?
    Me. -.-

    Well … Then I tried that fangled doohickey Google…


    Well Damn.

    Either way… I got to thinking.. If this works with the most insideuous dust out there (and it does!)… I’m so moving my workshop back to the basement!

    Profile photo of vicious1vicious1
    Post count: 2659
    #14821 |

    Yeah, that is next up for sure. I just poisoned myself on some wood dust these last few days. I was using the cnc and table saw all day and started to feel bad for being so loud. So trying to be a good neighbor I shut all the doors. Gave up looking for a dust mask after about 10 minutes. Learned a valuable lesson after a few hours of cold sweats and 2 days with no voice. I have a new 7500 series p100 respirator and new filters for the shop vac. Dust collection and fume control are serious. Still hurts to swallow….

    Profile photo of TeutTeut
    Post count: 5
    #14827 |

    Tried to load a pic yesterday but it was too large. But here’s my duct tape and standard shop vac attachment version. 7$ for a bucket with a lid…. 1 old t-shirt (put this in the water above the intake pipe supported by whatever you can find to prevent bubble messes), left over duct tape, 1 abused shop vac with hose and accessories. Now all I need to do is make a more permanent version and come up with some sound blocking stuff to quite things before relocating back to the basement … I think I’ll just try Google for that, before straining my brain trying to figure it out on my own.

    Profile photo of BarryBarry
    Post count: 332
    #15034 |

    I used to have one of these. https://www.amazon.com/MT800-Sand-Kleen-Sander-System/dp/B00005A1K8/ref=sr_1_1?ie=UTF8&qid=1469100092&sr=8-1&keywords=drywall+dust+collector

    Works great, but it sounds like a dieing elephant because of the ridges in the tubes. I’ve not tried my dust deputy with drywall dust, probably too fine for that. Dust deputy works great for the cnc though! I’ve filled the 5 gallon bucket with sawdust a dozen times now and haven’t had to replace the filter in the shop vac once since then. I use it to clean up after my table saw and chop saw, so that’s quite a bit of crap to clean up.

    • This reply was modified 3 months ago by Profile photo of Barry Barry.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.