Initial 300mm build completed from DaVinci 1.0 printer

New Home Forum Builds and Things Built Initial 300mm build completed from DaVinci 1.0 printer

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Tim Tim 1 month, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #20228
    Profile photo of Tim
    Tim
    Participant

    Just completed my first MPCNC build!

    – 300mm work area (may enlarge later)
    – All parts printed on DaVinci 1.0 in ABS
    – Dewalt DW660
    – Stepper motors wired with CAT5 STP (not ideal, but it’s all I had)

    Using ABS made everything go together fairly tight, but everything is very solid. The only issue I had was the typical Z-axis grinding which was resolved with some white lithium grease on the threaded rod.

    Thanks for such an awesome project!

    -Tim

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.