- toutain melodic tambourineParticipantJanuary 26, 2016 at 1:01 pmPost count: 13
I am looking for idea for the installation of the filament coil . I have not found anything on the site. Someone he pictures, video links etc ? I am in direct drive ( like MK8 ) .
Thank youvicious1KeymasterJanuary 26, 2016 at 2:01 pmPost count: 2646
I have them above on what used to be the conduit rack.
Attachments:CurtParticipantJanuary 26, 2016 at 7:56 pmPost count: 173
Looks like Ryan is building a MPCNC playground! I wonder how many machines he has?toutain melodic tambourineParticipantJanuary 26, 2016 at 10:48 pmPost count: 13
I was thinking of doing something like this BUT for my project I will have certainly close the machine. The box may be a very large volume …
For the moment I put the coil on a horizontal tubes but the extruder do not like at all … The coil is very low and the wire does not feed properly.
I’m on the idea of closing the machine and above (outside) instaler the coil.
If I can not return to Bowden and install the spool in the box?
You must be logged in to reply to this topic.