Machine Height?

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Ryan Ryan 1 year, 1 month ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13274
    Profile photo of Aaron
    Aaron
    Participant

    Hey all,
    So, I just placed my order for a Build-Bundle here and I’m pretty excited to get started with this project. I know I’ll have some questions along the way. To start with, though, I’m wondering about the height of my finished machine… Looking over the assembly guides and cut guides I have a guess. If I have a usable height of 5 inches, and I park the gantry with no tool mounted and the mount touching the spoil board, would I be correct in assuming a height of about 14 inches?

    I have the luxury of a fairly spacious shop, but I’m busy in there and always trying to plan my space. My plan at this moment is to build with a usable space of 20″x33″ (5″-Z).

    Thanks…
    Aaron.

    #13308
    Profile photo of Ryan
    Ryan
    Keymaster

    It will be whatever your z axis tube length is, plus the height of your Z stepper.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.