Middle assembly issues

This topic contains 4 replies, has 2 voices, and was last updated by Profile photo of Barry Barry 8 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #11873
    Profile photo of RAGII
    RAGII
    Participant

    I am having trouble with the final assembly steps. It appears that I have a part interference which is preventing me from lining up the last 3-1/2″ bolt. I have taken several pictures of the assembly. I also notice that the relief on the bottom of the assembly does not match how the part attaches. The upper relief appears to match.

    Any thoughts?

    #11885
    Profile photo of Barry
    Barry
    Participant

    One of your top/bottom pieces is upside down. Make it so the part that touched the support material faces into the assembly for both parts.

    #11886
    Profile photo of RAGII
    RAGII
    Participant

    Thanks Barry, I figured it was something stupid I did.

    All assembled now.

    #11890
    Profile photo of RAGII
    RAGII
    Participant

    I thought I read somewhere that people are not using the spring anymore. Is that the case or is it recommended to use it, just don’t crank the nut down to compress it a lot?

    Thanks

    #11900
    Profile photo of Barry
    Barry
    Participant

    Nope, doesn’t really need to be in there, just need the threaded rod joiner piece.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.