Mini-MPCNC

New Home Forum Builds and Things Built Mini-MPCNC

This topic contains 9 replies, has 5 voices, and was last updated by Profile photo of Vladimir Vladimir 3 weeks, 6 days ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #18375
    Profile photo of Vladimir
    Vladimir
    Participant

    Pictures only are attached – mini-MPCNC, bearing 624ZZ. Conduit 16mm (European version 🙂 )

    0)

    #18380
    Profile photo of vicious1
    vicious1
    Keymaster

    Holy cow, looks like someone got out the shrink ray! That is awesome looks great, and had to be a ton of work!

    #18381
    Profile photo of Vladimir
    Vladimir
    Participant

    and had to be a ton of work!

    actually not too much, just your excellent design copy-pasted 🙂 If you are ok (basically it is your construction), I can share stl files. Or maybe later, when everything will be working – so far I am waiting for shipping of steppers and extra bearings.

    #18390
    Profile photo of vicious1
    vicious1
    Keymaster

    Sure but lets wait until it has been tested, and please document it well, BOM, assembly ect.

    #18401
    Profile photo of Jakob Andersen
    Jakob Andersen
    Participant

    Very cool, I have also played a bit with a scaled down version before, this one is for 18mm with 625 bearings 🙂
    I only got as far as the rollers 😀

    Attachments:
    #18408
    Profile photo of Vladimir
    Vladimir
    Participant

    Really my project is not old – it has been started about 10 days ago. But I am in sick leave now – I do have lot of time (but lot of problems as well).

    Attachments:
    #18456
    Profile photo of Jasoroony
    Jasoroony
    Participant

    I don’t need to build a 5th machine.
    I don’t need to build a 5th machine.
    I don’t need to build a 5th machine.

    That thing is so cute though.

    I don’t need to build a 5th machine.

    #19471
    Profile photo of Vladimir
    Vladimir
    Participant

    Finally the first test
    video

    #19505
    Profile photo of Bill
    Bill
    Participant

    OK, the race is on… Who can build the smallest MPCNC?

    #20738
    Profile photo of Vladimir
    Vladimir
    Participant
Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.