New Rolloer assembly

This topic contains 3 replies, has 2 voices, and was last updated by Profile photo of vicious1 vicious1 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #14813
    Profile photo of Nino Nobile
    Nino Nobile
    Participant

    Hi, to join the RollerMount with Roller screws should I use 6/32 ” x 0.75 “?
    I have a small problem that is not falling nuts where they should go .

    I was thinking of heating with the welder.

    #14815
    Profile photo of vicious1
    vicious1
    Keymaster

    Those locknuts don’t look like they will fit. Did you use them on the previous design? The new design I have actually opened the nut slots up a little bit. I think you will either need a different brand/size of lock nut or just use a regular 6/32 with some locktite on it.

    #14925
    Profile photo of Nino Nobile
    Nino Nobile
    Participant

    Thanks for your answers, I used screws and nuts 5/32 . In the list of components is written 57 screws and nuts 6/32, are you sure is not 5/32?
    In my case I did not work 6/32.

    #14928
    Profile photo of vicious1
    vicious1
    Keymaster

    It should be a #6 screw, 32 refers to the pitch of the threads. As long as your up and running we are all happy.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.