Old Z lock files

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Daniel Huss Daniel Huss 7 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #13268
    Profile photo of Daniel Huss
    Daniel Huss
    Participant

    Is there a place I can get the old Z-nut lock STL files? I printed most all the parts, then had to step away for a while and all the parts got updated. From searching around it looks like there were two sizes and I must have printed the larger when I needed the smaller one.

    Thanks.

    #13272
    Profile photo of vicious1
    vicious1
    Keymaster

    https://www.dropbox.com/s/0dlwi09tq5a4khi/del-z%20nut%20lock%2011mm%20coupler.STL?dl=0

    this is for 11mm flat to flat coupling nuts on the 23.5mm version, let me know if you need to other version.

    #13275
    Profile photo of Daniel Huss
    Daniel Huss
    Participant

    That should be it exactly… Thanks. I’ll get some pictures together as the assembly moves along.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.