Pipe Racking Table for MPCNC

This topic contains 7 replies, has 4 voices, and was last updated by Profile photo of autox3d autox3d 5 months ago.

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #14984
    Profile photo of autox3d
    autox3d
    Participant

    I ordered a table made from this material this week for my 25.4 inch MPCNC with a 4×4 foot working area. (5×5 foot frame)

    I will submit adapters for the 28.5 inch tubing to one inch tubing in the racking once it arrives and I can put the calipers on it and get a good measurement of the ID of the racking.

    It is locally manufactured here in the Philippines for export. Used in Japanese car assembly lines and electronic factory assembly lines.

    #15023
    Profile photo of autox3d
    autox3d
    Participant

    http://www.thingiverse.com/thing:1683055

    here is the adapter file for using the ABS coated pipe racking

    Attachments:
    #15167
    Profile photo of autox3d
    autox3d
    Participant

    Pipe racking table is here, measured the ID of the ABS coated pipe, it is 23mm, ID of the stainless tubing is 22.7, So i guess a quick printed male to male adapter will work better.

    Making the adapter with a bolt down the center to reinforce it.

    #15356
    Profile photo of Benjamin Shaw
    Benjamin Shaw
    Participant

    Any pics? Sounds neat.

    #15533
    Profile photo of nerdyrcdriver
    nerdyrcdriver
    Participant

    At work there is a table assembly area where the maintenance people for the assembly lines design and build tables similar to that cart. They are pretty dang sturdy for how lightweight they are. I’ve been building a lot of desks/work benches out of 2x4s and mdf, but I think the next one will be out of ETM conduit and 3d printed parts similar to the table Vicious designed.

    Would love to see pics as you work with this and find what works good and what could be improved.

    #15538
    Profile photo of vicious1
    vicious1
    Keymaster

    I just got my dirty little hands on a tig welder….New table for me as well!

    #15540
    Profile photo of autox3d
    autox3d
    Participant

    The 3d printed adapter for the coated pipe to stainless was a dud. I gotta have something turned on the lathe.

    Bit behind schedule to finish mine as I got a 1.5×2.5 meter monster router way behind schedule to finish.

    Ill try to grab a couple pics tomorrow

    #16271
    Profile photo of autox3d
    autox3d
    Participant

    Here are pics. Had to get the big open builds machine out of the shop to make room

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.