Repetier Placement Issues

New Home Forum Software Development Repetier Placement Issues

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Fernando Topete Fernando Topete 10 months, 2 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #8743
    Profile photo of Fernando Topete
    Fernando Topete
    Participant

    So I’m new at this, and am having issues with placing jobs correctly on the CNC mill. Every object I load ends up on the bottom right corner, and I have no idea how to get the mill to correctly carve the piece. Can anyone help me figure this out?

    #8755
    Profile photo of vicious1
    vicious1
    Keymaster

    That placement is how I do it. It is using 0,0,0 as the surface of your material and set your tool in the center of your piece. Make sense? This will not work if you are using endstops though.

    #8757
    Profile photo of Fernando Topete
    Fernando Topete
    Participant

    I’m not using endstops, but I can’t ever seem to actually get the thing to cut correctly. Part of me wishes I had someone local to show me the first time. Youtube sucks and doesn’t have a video on this…

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.