shop having issues, bit settings

New Home Forum Troubleshooting shop having issues, bit settings

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Kevin Kevin 2 weeks, 1 day ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #21375
    Profile photo of Kevin
    Kevin
    Participant

    Just a heads up, but the shop doesn’t load for me.

    I was actually going to double check the dimensions for the bits I purchased from here, so I can enter a new tool for each bit into estlcam.
    tip angles ect….

    I believe I bought all but one …7 total anyhow.
    Is there another reference page that might show this info, or someone who might have a screenshot that correlates the settings they might be using on these bits?

    Much appreciated.

    #21377
    Profile photo of vicious1
    vicious1
    Keymaster

    Seem to be working now, sorry about the issue.

    Let me know if there is any info missing.

    #21381
    Profile photo of Kevin
    Kevin
    Participant

    Perfect thanks, works.

    And no worries, thanks again for the quick shipping.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.