Home / Forum / Builds and Things Built / Smallest thing I've done yet…

Viewing 2 posts - 1 through 2 (of 2 total)
  • Profile photo of ualdayanualdayan
    Post count: 61
    #5051 |

    I did this 1.5 inch by 1.5 inch sign with a 0.0315 inch bit (0.8mm), I attached a photo with a dime for a size comparison.

    The wood was some cheap plywood underlayment that had some defects and was 70% off at Home Depot (they keep a cart near the cutting area usually). The bit was $1.49 from here.

    Profile photo of vicious1vicious1
    Post count: 2625
    #5055 |

    Holy cow!
    I just watched the talk the CEO of the Othermill did at the hackaday conference. It got me very interested in pressing this thing to its lower limits I want to see what we can achieve for 1/3rd-1/4th the price. I need to learn some PCB software or find something I can download and try a cut on a tiny level. You just inspired me to get dirty!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.