Reply To: Setting X_MAX_POS and Y_MAX_POS in firmware

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Setting X_MAX_POS and Y_MAX_POS in firmware Reply To: Setting X_MAX_POS and Y_MAX_POS in firmware

#10135

geodave
Participant

That was my problem. Thanks for pointing that out. Having this problem did lead me to make another change in the Configuration.h file.
I uncommented the following line so I could make minor adjustments to the firmware to test something without writing all the firmware:

#define EEPROM_SETTINGS

Thanks again for spotting my problem.