Reply To: Z Axis not cutting to depth

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Z Axis not cutting to depth Reply To: Z Axis not cutting to depth

#11335

Jeffeb3
Participant

I’m using your adjustable feet. They are as small as they can get, about 3.25″. The distance from the bottom of the middle to the spoil board is about 3.5″

Does it matter how high the z motor is above the middle Z? I’ve got a few inches of extra up there. I was just lazy and didn’t want to cut the screw.