Funny that you should mention that. My parts were actually printed from 3 different brands of PLA.
I know that while printing the feet that I ran out of PLA and switched to a different brand. The spindle mount that cracked was printed from a 3rd brand the brand I had been using was out of stock.
1 brand was from Craftunique that I got with my printer, another was eSun and the 3rd brand was Colido.
All 3 had quite different characteristics when printing. The Craftunique stuff had to be printed about 20 degrees hotter than the other 2 types and didn’t like to adhere to glass. The eSun and Colido printed well at similar temperatures to eachother but the bed adhesion of the Colido was fantastic.