Reply To: Gantry Rail Height – Y-Axis Rail slightly above rollers

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Gantry Rail Height – Y-Axis Rail slightly above rollers Reply To: Gantry Rail Height – Y-Axis Rail slightly above rollers

#18037
Profile photo of Jono Skipwith
Jono Skipwith
Participant

Thanks viscious1. The Spacers printed pretty well unless they are over-extruded but I don’t think so. I was thinking I would sand the Spacers to try to fix the problem.