New Home › Forum › Mostly Printed CNC – MPCNC › Troubleshooting – MPCNC › Different problems on the three axes (including the Z buzz / dive) › Reply To: Different problems on the three axes (including the Z buzz / dive)
Not many people seemed to be able to get the adjustment right so I took the anti backlash out of the new design.
You are not reading the voltage right. Measure from the metal pot itself to the ground, it cannot go over 1.6v so you are on the wrong thing. This could be your problem, to much and it will over heat, to little and no power. Very precise adjustment.