New Home › Forum › Mostly Printed CNC – MPCNC › Troubleshooting – MPCNC › Perfect built at last (after a lot of tuning) – oval circles and rectangulars › Reply To: Perfect built at last (after a lot of tuning) – oval circles and rectangulars
@vicious1 – the attache SVG shows the result of my test. I am attaching a screenshot of the SVG
You can seee that the X direction is pretty close. The boxes on top are 90deg but not square. The circle in the middle is 50mm radius or 100mm diameter and is about 3mm off. I centered the plot on the top of the large circle and you can see the boxes are longer towards the top. The text at the bottom starts way lower too.