Reply To: How To/Heated bed not working

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC How To/Heated bed not working Reply To: How To/Heated bed not working

#19913

PureField
Participant

Made some changes to the merlin settings based on blog posts I found.
diff –git a/Configuration_adv.h b/Configuration_adv.h
index e4e3b25..66664d3 100644
— a/Configuration_adv.h
+++ b/Configuration_adv.h
@@ -94,7 +94,7 @@
* Thermal Protection parameters for the bed are just as above for hotends.
*/
#if ENABLED(THERMAL_PROTECTION_BED)
– #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
+ #define THERMAL_PROTECTION_BED_PERIOD 30 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius

/**
@@ -106,8 +106,8 @@
* If you get too many “Heating failed” errors, increase WATCH_BED_TEMP_PERIOD and/or decrease
* WATCH_BED_TEMP_INCREASE. (WATCH_BED_TEMP_INCREASE should not be below 2.)
*/
– #define WATCH_BED_TEMP_PERIOD 60 // Seconds
+ #define WATCH_BED_TEMP_PERIOD 180 // Seconds
#endif