Reply To: Current Limit Help on Non-Standard components

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Current Limit Help on Non-Standard components Reply To: Current Limit Help on Non-Standard components

#19930

Ryan
Keymaster

In parallel for the x and y no more than 4/2.5=1.6v max but I am guessing that you can’t turn them up much higher than .6 or .7
In series 2/2.5= .8v but that again should be max so .6 or .7 this also works for the Z axis.

You are fighting thermal shutdown so keep an eye on them for the first few uses, drivers and stepper temps.